 |
 |
TruLaser 5030 |
|
|  |
| Application |
Laser cutting of sheets
|
| Category |
High-end machine, processing of thick and thin sheets |
Working
range |
TruLaser 5030:
3000 mm x 1500 mm
TruLaser 5040 NEW:
4000 mm x 2000 mm
TruLaser 5060 NEW:
6000 mm x 2000 mm |
| Laser |
TruFlow 5000 / 6000 / 7000 |
| Sheet thickness |
max. 30 mm in stainless steel |
| Automation |
Possible for everything from simple loading equipment to complex storage connection |
The new TruLaser Series 5000 distinguishes itself mainly through its improved processes, higher dynamics and shorter non-productive times. This enables even faster and better quality processing than you are already used to with the TRUMPF laser cutting machines. |
| | |
|
 |
|
Typical sheet metal parts |
|
| | Through thick and thin with a single cutting head
With the complete, newly developed cutting head on the TruLaser 5030 / 5040 NEW / 5060 NEW, it is possible to cut any and all materials and material thicknesses without changing the cutting head. You can now cut sheet metal of any thickness using the same cutting head. It is no longer necessary to change the head. This is particularly advantageous if you process various materials using automated processes.
And this is how the new laser cutting head works:
FastLine – Optimal cutting
The new process FastLine optimizes the entire cutting process and ensures maximum efficiency. The universally optimized piercing processes result in considerably shortened processing times and thereby a considerable increase in productivity.
High-performance laser TruFlow 5000 / 6000 / 7000
The high-performance laser that the TruLaser 5030 / 5040 NEW / 5060 NEW are equipped with guarantees consistently high laser performance for years thanks to an improved, prolonged stability. The high laser performance opens up great potential when it comes to laser cutting:
- High-speed cutting up to 40 m/min
- Ability to laser cut thick metal sheets:
- Structural steel up to 25 mm
- Stainless steel up to 30 mm
- Aluminium up to 20 mm
|
|
|
 |
|
TruLaser 5030 with LiftMaster Store |
|
| | Automation
The automation concept of the TruLaser 5030 is distinguished mainly by its modularity. Any and all kinds of automation components are available for the large component systems, including semi-automated loading to a fully automated production cell with store connection.
 More
|
Technical Data
| |
TruLaser 5030 |
TruLaser 5040 NEW |
TruLaser 5060 NEW |
| Working range |
X axis: 3000 mm
Y axis: 1500 mm |
X axis: 4000 mm
Y axis: 2000 mm |
X axis: 6000 mm
Y axis: 2000 mm |
| Z axis: 115 mm |
Z axis: 115 mm |
Z axis: 115 mm |
| Max. sheet thickness |
25 mm (mild steel)
30 mm (stainless steel)
20 mm (aluminium) |
| Max.
axis speeds |
300 m/min (simultaneous, approx.) |
| TRUMPF CO2 laser |
TruFlow 5000 / 6000 / 7000 |
| Space requirements |
11250 mm x 4600 mm |
13000 mm x 5400 mm |
16950 mm x 5550 mm |
|
|
){kind=small}
){kind=small}
){kind=small}